Repair Heat Exchanger , Rebuild Heat Exchanger , Retubing Heat Exchanger , Service Heat Exchanger , Tube Bundle

Pt. Metalindo E Engineering  sangat akhli dalam fabrikasi  Tubular Heat Exchanger maupun Air Cooled Heat Exchanger dan itu tidak hanya meliputi pekerjaan perencanaan dan  fabrikasi  unit tersebut . apabila perbaikan dipandang lebih effective dan ekonomis , kamipun sanggup melaksanakan pekerjaan tersebut di workshop kami maupun di lapangan .

Pekerjaan mulai dari pengujian tekan , penyumbatan penggantian pipa / retubing , pembersihan hingga pelapisan / Coating .

Incinerator , incinerator rumah sakit , incinerator , liquid waste incinerator , medical waste incinerator , pembakar sampah , solid waste incinerator

Jenis Incinerator thermo Q  sangat beragam  dalam penggunaannya  , semua incinerator dirancang secara khusus untuk jenis limbah yang dibakar .

Mulai dari limbah padat , limbah cair , Lumpur atau limbah medik .

Dirancang secara unik menggunakan multy chamber , jenis ini terbukti mengurangi banyak 

Mengurangi abu terbang didalam emisinya.

Kapasitas  standard  :  50 Kg/hr ~ 1.000 Kg/hr

Welded Fin Tube , H Fin Tube , square fin tube , Helical Fin Tube , Solid Type Fin Tube , High frequency welded fin tube , economizer fin tube , super heater

Welded helical finned tubes are used in boilers, furnaces and fired heaters. A continuous helical fin is attached to the base by high frequency electric resistance welding in order to give an efficient bond. Fins can be either solid or serrated.

Tube and Pipe sizes available
Tube OD: 25.4 / 31.8 / 50.8 / 63.5 and 76.0mm
Pipe OD: 88.9 / 101.6 / 114.3 / 141.3 / 168.3 and 219.1mm
Tube/Pipe Thickness:
Minimum 2.13mm (solid fin), 1.9mm (serrated fin)
Minimum thickness is also dependant on the fin thickness and tube/pipe OD
Fin Height Range
Solid fin:6.3mm-31.8mm Serrated fin: 12.7mm - 38.1mm
Fin Height is dependant  on the fin type (solid or serrated) tube OD, fin thickness and material.
Fin thickness is dependant on the fin material, height of the fin, and tube OD. Usually between 1.0mm and 3.4mm
Fin Density is dependant on the fin type (solid or serrated) tube OD, fin thickness and fin material. Density is generally between 1 fin/inch and 7 fins/inch. Materials for both tube/pipe and fin can be a combination of carbon steel, low alloy steel and stainless steel.